Home > News > Content
5mm Cylindrical LED For Outdoor Display Application
Aug 04, 2018

Basic Info

Model NO.: 5mm Cylindrical LED

Certification: RoHS

Trademark: Elecsound

Transport Package: bulk

Specification: Rohs

Origin: china

HS Code: 8541401000

Product Description

5mm Cylindrical LED


Features
High efficiency
Low Power consumption
General purpose leads
Selected minimum intensities
Available on tape and reel
Pb free

Descriptions
The series is specially designed for applications
Requiring higher brightness
The LED lamps are available with different
Colors, intensities, epoxy colors, etc
Superior performance in outdoor environment

Usage Notes:
The ultra bright LED is an electrostatic insensitive device, so static electricity and surge will damage the LED. It is required to wear a wrist-band when handling the LED. All device, equipment, machinery, desk and ground must be properly grounded
When using LED, it must use a protective resistor in series with DC current about 20mA

Applications
Status indicators
Commercial use
Advertising Signs
Back lighting

Device Selection Guide

LED Part No. Chip Lens Color
Material Emitted Color
InGaN Green Water clear

Absolute Maximum Rating (Ta=25C)
Parameter Symbol Absolute Maximum Rating Unit
Forward Pulse Current IFPM 70 mA
Forward Current IFM 30 mA
Reverse Voltage VR 5 V
Power Dissipation PD 140 mW
Operating Temperature Topr -40~+80C
Storage Temperature Tstg -40~+100C
Soldering Heat (5s) Tsol 260C

Electro-Optical Characteristics (Ta=25C)
Parameter Symbol Min. Typ. Max. Unit Test Condition
Luminous Intensity Iv 1500 2000 --- mcd IF=20mA(Note1)
Viewing Angle 2θ 1/2 80 --- 100 Deg (Note 2)

Peak Emission Wavelength λ P 520 525 530 nm IF=20mA

Spectral Line Half-Width Dλ 30 35 40 nm IF=20mA

Forward Voltage VF 2.9 --- 3.5 V IF=20mA

Reverse Current IR --- --- 10 μ A VR=5V

Note:
1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve.
2.1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
 

Part NumberChipLens  TypeVF(V)
If=20mA
IV(mcd)
If=20mA
Angle         
2θ1/2
MaterialEmitted ColorWave Length                   λD(nm)
3504R1C-KHB-AAlGaInPRed620-635Water Clear1.9-2.5200-450100
3504R1C-KHC-BAlGaInPRed620-635Water Clear1.9-2.5400-700100
3534R1C-KHE-CAlGaInPRed620-635Water Clear1.9-2.5600-1000100
3534R1C-KSA-DAlGaInPRed620-635Water Clear1.9-2.51200-2000100
3504Y1C-KHB-AAlGaInPYellow580-595Water Clear1.9-2.5200-450100
3504Y1C-KHC-BAlGaInPYellow580-595Water Clear1.9-2.5400-700100
3534Y1C-KHE-CAlGaInPYellow580-595Water Clear1.9-2.5600-1000100
3534Y1C-KSA-DAlGaInPYellow580-595Water Clear1.9-2.51200-2000100
3503G6C-KHB-SAlGaInPGreen565-575Water Clear1.9-2.5200-350100
3534G3C-KSA-AInGaNGreen520-535Water Clear2.9-3.5600-1100100
3534G3C-KSB-BInGaNGreen520-535Water Clear2.9-3.52000-2500100
3534B2C-KHD-AInGaNBlue460-470Water Clear2.9-3.5400-700100
3534B2C-KHE-BInGaNBlue460-470Water Clear2.9-3.5600-1000100
3534B2C-KSA-CInGaNBlue460-470Water Clear2.9-3.51000-1500100
3534W2C-KHD-AInGaNWhite Water Clear2.9-3.5600-800100
3534W2C-KSA-BInGaNWhite Water Clear2.9-3.51000-1500100
3534W2C-KSB-CInGaNWhite Water Clear2.9-3.52000-2500100
5603R1C-KHB-AAlGaInP Red620-635Water Clear1.9-2.3200-45090
5603R1C-KHC-BAlGaInP Red620-635Water Clear1.9-2.3300-50090
5634R1C-KHE-CAlGaInPRed620-635Water Clear1.9-2.5600-100090
5634R1C-KSA-DAlGaInP Red620-635Water Clear1.9-2.31200-200090
5603Y1C-KHB-AAlGaInPYellow580-595Water Clear1.9-2.5200-45090
5603Y1C-KHC-BAlGaInPYellow580-595Water Clear1.9-2.5300-50090
5634Y1C-KHE-CAlGaInPYellow580-595Water Clear1.9-2.5600-100090
5634Y1C-KSA-DAlGaInPYellow580-595Water Clear1.9-2.51200-200090
5603G6C-KHB-SAlGaInPGreen565-575Water Clear1.9-2.3200-35090
5634G3C-KSA-AInGaNGreen520-535Water Clear2.9-3.5600-110090
5634G3C-KSB-BInGaNGreen520-535Water Clear2.9-3.51200-220090
5634B2C-KHD-AInGaNBlue460-470Water Clear2.9-3.5400-80090
5634B2C-KHE-BInGaNBlue460-470Water Clear2.9-3.5600-100090
5634B2C-KSA-CInGaNBlue460-470Water Clear2.9-3.51000-150090
5634W2C-KHD-AInGaNWhite Water Clear2.9-3.5400-80090
5634W2C-KSA-BInGaNWhite Water Clear2.9-3.51000-150090
5634W2C-KSB-CInGaNWhite Water Clear2.9-3.51800-280090
5703R1C-KHB-AAlGaInP Red620-635Water Clear1.9-2.3200-45090
5703R1C-KHC-BAlGaInP Red620-635Water Clear1.9-2.3300-50090
5734R1C-KHE-CAlGaInPRed620-635Water Clear1.9-2.5600-100090
5734R1C-KSA-DAlGaInP Red620-635Water Clear1.9-2.31200-200090
5734Y1C-KHB-AAlGaInPYellow580-595Water Clear1.9-2.5200-45090
5734Y1C-KHC-BAlGaInPYellow580-595Water Clear1.9-2.5300-50090
5734Y1C-KHE-CAlGaInPYellow580-595Water Clear1.9-2.5600-100090
5734Y1C-KSA-DAlGaInPYellow580-595Water Clear1.9-2.51200-200090
5703G6C-KHB-SAlGaInPGreen565-575Water Clear1.9-2.3200-35090
5734G3C-KSA-AInGaNGreen520-535Water Clear2.9-3.5600-110090
5734G3C-KSB-BInGaNGreen520-535Water Clear2.9-3.51200-220090
5734B2C-KHD-AInGaNBlue460-470Water Clear2.9-3.5400-80090
5734B2C-KHE-BInGaNBlue460-470Water Clear2.9-3.5600-100090
5734B2C-KSA-CInGaNBlue460-470Water Clear2.9-3.51000-150090
5734W2C-KHD-AInGaNWhite Water Clear2.9-3.5400-80090
5734W2C-KSA-BInGaNWhite Water Clear2.9-3.51000-150090
5734W2C-KSB-CInGaNWhite Water Clear2.9-3.51800-280090
5603R4C-KPA-PGaPRed640Water Clear1.8-2.410-5090
5603G6C-KPB-PGaPGreen565-575Water Clear1.9-2.310-5090


Product Overviews

We currently offer a broad range of capacitors, LEDs, Cermet Trimming Potentiometers, PCBs, Semiconductors, Transistors, Zinc Oxide Varistors, Switches and Resistors.


Company Information

Elecsound is an ISO Certificated  manufacturer of high quality, high reliability electronic components, formed in January of 1996. Our staff has over 10 years of experience with excellent English. All of our employees have a strong work ethic and a strong commitment to provide the high quality products that consistently meet or exceed our customer's requirements.


FAQ
1: How long is your lead time?
It depends. Normally, it is 2-6 working days if the goods are in stock, or it is 7-40 days if the goods not in stock.
 
2: What is your terms of payment ?
For small amount orders, 100% better paid by PayPal or T/T in advance. For large amount orders like more than
10000USD, 30% T/T in advance , balance fully paid before shipment.
 
3. Do you have any MOQ limit for an order?
Yes, we have MOQ. different items have different MOQ. We will mark MOQ when we quote.
 
4: How to proceed an order?
Firstly, let us know your requirements or application. Secondly, we quote according to your requirements or our suggestions. Thirdly, customer confirms the samples and pay deposit for the official order. Finally, we arrange the production and ship once it's ready.  
 
5: Do you accept Alibaba online orders?
Sure!! We prefer to fulfil orders under Alibaba Trade Assurance system, since both parties will be protected.   
 
6: Do you provide samples? is it free or extra?
Yes, normally we could offer samples with free charge but do not pay the shipping freight. 
   
7: How do you guarantee my goods right?
Order will be arranged exactly as requested, we will doubly check the packing and qty before delivering out also we will take you photos if required or necessary.
 
8: Is it OK to print my logo on the packing?
Of course, customized packing accepted!! But it may bring some cost, it depends on the qty, if small qty then we don't accept.