Home > News > Content
High Power 3W 365nm Nichia Chip UV Light LED
Jul 11, 2018

Basic Info

Model NO.: ZD-N033C-365

Type: UV LED

Wavelength: 365nm

Trademark: LED ZHIDING

Transport Package: Carton

HS Code: 8531200000

Product Description


High Power LED Product Data Sheet:

Procduct NamePowerCurrentVoltageRadiation FluxWavelengthWorking Temperature
ZD-N033C-3653W500-700mA3.6-3.8V750mW365nm-10~85oC

Note: 1. Optical characteristic at Ta=25oC.
           2. The forward voltage is measured with an accuracy of ±0.05V.
           3. Radiometric power is measured with an accuracy of ±6%
           4. Calculated values are for reference only.

Product Dimension


ItemPackage MaterialsClass MaterialsElectrodes MaterialsDie Heat Sink MaterialWeight
DescriptionCeramicsHard GlassAu-platedAu-plated0.25kg

1.This product is suitable for reflow soldering.
2.Reflow soldering can not exceed twice.



UV LED 365nm3W products are widely used in medical devices, disinfection, instruments, phosphor reflection, UV glue curing, special lighting.

UV curing refers to a special way in which coatings, inks and adhesives are cured or dried using "energy" from UV light sources, rather than conventional heat. In effect, the ultraviolet light spectrum in a UV lamp interacts with specially formulated chemistries to cure materials--typically more quickly, using less energy and thereby at lower cost than by other methods.
 
 The advantages of UV have been well-documented, particularly when used with manufactured products that include inks, adhesives and coatings on substrates that are sensitive to heat. In addition, UV is considered environmentally friendly since most of the solvents in inks, paints, adhesives and coatings can be eliminated, thanks to the special capabilities of UV curing.
 
 The UV LED technology is further revolutionizing the UV curing space. Since traditional UV light sources such as tubes and arc lamps contain Mercury, a notorious pollutant, the availability of mercury free UV LEDs is bringing further environmental soundness to the UV curing industry.