Dongguan Zhiding Electronics Technology Co., Ltd. is one of the most reliable manufacturers and suppliers of 0805 deep red led – plain & flashing ic versions in China, also supports customized service. If you're going to wholesale advanced 0805 deep red led – plain & flashing ic versions made in China, welcome to get quotation from our factory. Also, 2 years warranty is available.

Products Description

0805 Deep Red LED – Standard Non-IC and Built-In IC Flashing Version, All Colors Customizable.

Most 0805 red LEDs sit around 620–630nm, which is fine indoors but disappears the moment you put it behind a colored lens or take it outside. Our deep red is held at 650–670nm - it reads as red through amber and orange diffusers, and it doesn't wash out in direct sun. The plain version is just a standard AlInGaP chip in a 2.0×1.25mm SMD body: no IC, steady light, you control it with a resistor. The flashing version has a driver IC built into the same 0805 package, so it blinks on its own - no microcontroller, no 555, no extra board space.

Standard 0805 Deep Red LED – No IC

0805 deep red smd led

0805 Deep Red Flashing LED – Built-In IC Version

0805 Deep Red LED – Plain vs Built-in IC Flashing

Parameter	Plain (No IC)	Flashing (Built-in IC)
Emitted Color	Deep Red	Deep Red (customizable)
Lens	Water Clear	Water Clear
Chip Material	AlInGaP	AlInGaP + Driver IC
Dominant Wavelength	650–670 nm	~650–670 nm (confirm per bin)
Forward Voltage	1.8–2.6 V @ 20mA	~2.6–3.4 V (depends on IC/bin)
Luminous Intensity	60–120 mcd @ 20mA	Tuned for flash visibility, quoted per sample
Forward Current	20 mA typ, 30 mA max	20 mA max continuous
Peak Forward Current	100 mA @ 1/10 duty, 1kHz	~220 mA (per IC class)
Flash Function	No – steady light only	Yes – self-flashing, no external circuit
Flash Mode	N/A	Single blink default; slow/fast/double on request
Flash Rate	N/A	~1.5 Hz typical
Reverse Voltage	5 V	5 V
Reverse Current	10 µA max @ 5V	10 µA max @ 5V
Power Dissipation	72 mW max	~60 mW max
Viewing Angle	120°	120°
Operating Temperature	-40 to +80 ℃	-40 to +80 ℃
Storage Temperature	-40 to +85 ℃	-40 to +80 ℃
Package Size	2.0 × 1.25 mm (0805)	2.0 × 1.25 mm (0805)
Reflow Soldering	Peak 260℃, 10s max	Peak 260℃, 10s max; max 2 passes
Hand Soldering	<300℃, <3s, one pass	<300℃, <3s, one pass
Packing	3000 pcs/reel, 8mm tape	8mm tape, reel qty confirm per order

A note on the flashing build: the IC changes the forward voltage, so your existing 20mA resistor won't necessarily give you 20mA. We spec VF as a range (~2.6–3.4V typical) and tighten it per bin on request. Flash rate in the table is around 1.5Hz as a reference - if you need it locked for a regulated product, say so up front; for toys and consumer gear the standard spread is fine. Also, the flash mode is single blink by default; slow, fast, and double are available, but they're not something you switch in software - it's set by the IC inside.

Plain vs Flashing - which one to choose?
Plain 0805 deep red, no IC: cheapest, most stable for steady light, you control dimming/blink from PCB.
Flashing 0805 deep red, with IC: simplest dynamic indication, no MCU, no 555 timer, no MOSFET.
Plain is better for backlight, constant status, automotive dash, optical marking.
Flashing is better for alert, pairing, low-battery blink, toy/gift, safety marker, decorative pulse.

All 0805 Colors Available - Plain or IC Flashing
Any 0805 color: red, deep red, orange, yellow, green, blue, white, warm white, violet, pink, amber
Any version: plain, or IC flashing
Flash modes: single, double, slow, fast - set per IC bin
Specify: color, plain/flash, brightness bin, VF bin, wavelength, tape/reel qty

We've been supplying 0805 SMD LEDs for years, and deep red is one of those colors that customers keep coming back for - not the bright fire-engine red you see everywhere, but the deeper 650–670nm range that actually looks red through a tinted lens or in outdoor daylight. The plain version is straightforward: no IC, no tricks, just a solid AlInGaP chip in a standard 2.0×1.25mm package. If you've used any 0805 red LED before, this one drops in the same footprint, same reflow profile, same tape and reel. The difference is in the binning - we hold wavelength tight because deep red drifts are way more visible to the eye than regular red.

smd 0805 deep red led

Hot Tags: 0805 deep red led – plain & flashing ic versions, China, manufacturers, wholesale, customized, bulk, in stock, free sample, 0805 Led Yellow Green Color, 0805 Orange Led, 0805 red white led, 0805 rgb led, Smd 0805 Yellow Led, White Smd Led 0805

0805 Deep Red LED – Plain & Flashing IC Versions

Products Description